6218 NSK Open Deep Groove Ball Bearing 90mm inside x 160mm outside x 30mm wide Shields da min 92 mm Minimum

da min 92 mm Minimum diameter shaft shoulder

Shaft Diameter d: 2

Nlim - Grease lubrication limit speed 6400 tr/min

the 6000-2Z/C3 is protected from larger particles and contaminants while maintaining low-friction operation

Fatigue Limit Load 3000

6218 NSK Open Deep Groove Ball Bearing 90mm inside x 160mm outside x 30mm wide Shields da min 92 mm MinimumNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass